Request a Quote

Thank you for your interest in LEWCO Industrial Ovens!

Before you begin, have you tried the LEWCO Product Configurator? LEWCO’s Product Configurator is faster than the traditional RFQ process and allows users to actually see their product and all its various options in a very clear and detailed spec sheet. Try it out!

If you prefer the traditional RFQ process, please fill out the RFQ Form below. After you fill out all sections hit submit, and a member of our sales team will contact you to discuss next steps. You may also chose to download and right click “save as” for a PDF version of the Batch Oven RFQ, Conveyor Oven RFQ, OR Drum or Tote Heater RFQ instead. Please email the completed form to ovensales@lewcoinc.com or fax a printed version to 419-625-1247.

General Information
Name*
First Last
Company*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Phone
Email*
Select Product Type*
Summarize Requirements
CAPTCHA
Batch Oven Application Form
What is your application?
- Annealing
- Baking
- Curing
- Drying
- Pre-Heating
- Other
If other, please specify:
If drying, how much water is being evaporated?
What are the required internal oven dimensions? (width x depth x height)
What is the product to be heated?
Dimensions:
Weight:
Are any solvents, flammable volatiles, or combustible materials present?
- Yes
- No
*If yes, you will need a "Class A" Oven under NFPA 86 Standards for Ovens & Furnaces
If solvents are present, what is the quantity or "solvent load" in gallons/batch?
What is the solvent?
How is the product loaded and unloaded?
- Carts
- Forklift
- Racks
- Other
If other, please specify:
What is the maximum required operating temperature, (max. oven set point)? Please specify degrees Celcius or Fahrenheit
Temperature Units
- °F
- °C
Do you require temperature uniformity?
- Yes
- No
If yes, what is the tolerance? Please specify degrees (+/-) Celcius or Fahrenheit
Temperature Units
- °F
- °C
Is there a known controlled or critical temperature the products must reach?
- Yes
- No
If yes, is there a controlled rate or critical time requirement to bring product up to temperature?
How long must the product be subjected to operating temperature ("soak", dwell time, cycle time)?
Does the process require a controlled cooling cycle?
- Yes
- No
If yes, please explain:
What is preferred heating medium?
- Direct-Fired Natural Gas
- Electric
- Steam / Hot Oil
- Other
If other, please specify:
What is the preferred heater box location?
- Top Mounted
- Rear Mounted
What is the preferred airflow pattern?
- Dual (Combination)
- Horizontal
- Vertical Up / Down
What type of flooring do you require?
- No Floor
- 12 ga. Plate Steel
- Insulated (100 psf max.)
- Other
If other, please specify:
What type of doors do you require?
- Bi-parting swing doors
- Vertical lift guillotine door
- Other
If other, please specify:
Do you require doors at both ends of the oven?
- Yes
- No
What is the supply voltage?
- 480/3/60
- Other
If other, please specify:
Do you require any additional options?
- Batch Timer
- Door Switch
- Ramp / Soak Controller
- Chart Recorder
- Zero Speed Switch for Fan(s)
- Composite Curing Controls
- Exhaust Fan
- Touchscreen HMI
- Programmable Logic Controller (PLC)
- Other Control Requirements
If other, please specify:
Who is responsible for shipment?
- LEWCO
- Customer
If LEWCO, please provide a shipping address for freight quote:
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Same addresses as above
- Same address as above
Who is responsible for the equipment installation?
- LEWCO
- Customer
If LEWCO, in what capacity?
- Total
- Supervision
Is non-union labor acceptable?
- Yes
- No
Do you require a budgetary installation quote?
- Yes
- No
Please indicate any physical space limitations of the installation location:
Please provide any additional information or requirements:
Conveyor Oven Application Form
What is your application?
- Annealing
- Baking
- Curing
- Drying
- Pre-Heating
- Other
If other, please specify:
If drying, how much water is being evaporated?
What is the required length of the oven OR what is the required time the product must be in the oven?
Conveyor speed or rate:
- Continuous
- Indexing
If continuous, what are the rates? (inches/minute):
If indexing, what are the rates?
Index Frequency (minutes): Dwell Time (minutes):
What is the required height inside the oven?
What is the required width of the conveyor?
Conveyor preference?
- Wire Mesh Belt
- Chain & Slat
- Roller
- No Preference / Not Sure
If not sure, please describe the bottom surface of the product or container that will come in contact with the conveyor (i.e. flat, rigged, etc.):
How is the oven loaded/unloaded?
- Another Conveyor
- Robot
- Manually
- Other
If other, please specify:
LEWCO's standard load/unload height at the entrance and exit of the oven is 30'' to top of conveyor. Is this suitable for your application?
- Yes
- No
If no, please specify height requirements:
What is the required conveyor length at the entrance and exit of the oven?
Entrance length: Exit length:
What is the product to be heated?
Name
Dimensions: Weight:
Is product on trays or slave pallets?
- Yes
- No
Are any solvents, flammable volatiles, or combustible materials present?
- Yes
- No
*If yes, you will need a "Class A" Oven under NFPA 86 Standards for Ovens & Furnaces
If solvents are present, what is the quantity or "solvent load" in gallons/minute?
What is the solvent?
What is the maximum required operating temperature, (max. oven set point)? Please specify degrees Celcius or Fahrenheit
Temperature Units
- °F
- °C
Do you require temperature uniformity?
- Yes
- No
If yes, what is the tolerance? Please specify degrees (+/-) Celcius or Fahrenheit
Temperature Units
- °F
- °C
Is there a known controlled or critical temperature the products must reach?
- Yes
- No
If yes, is there a controlled rate or critical time requirement to bring product up to temperature?
How long must the product be subjected to operating temperature ("soak" or dwell time)?
Are multiple temperature zones required?
- Yes
- No
If yes, please explain:
Does the process require a cooling zone?
- Yes
- No
If yes, please explain:
What is preferred heating medium?
- Direct-Fired Natural Gas
- Electric
- Steam / Hot Oil
- Other
If other, please specify:
What is the preferred airflow pattern?
- Dual (Combination)
- Horizontal
- Vertical Down
- Other
If other, please specify:
What is the supply voltage?
- 480/3/60
- Other
If other, please specify:
What kind of openings do you require for the entrance/exit of the conveyor?
- Strip Curtains
- Adjustable Insulated Plates
- Vertical Lift Guillotine Doors
- Open, no covers
Do you require any additional options?
- Data Logger
- Chart Recorder
- Zero Speed Switch for Fan(s)
- Exhaust Fan
- Touchscreen HMI
- Programmable Logic Controller (PLC)
- Other Control Requirements
If other, please specify:
Who is responsible for shipment?
- LEWCO
- Customer
If LEWCO, please provide a shipping address for freight quote:
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Same address as above
- Same address as above
Who is responsible for the equipment installation?
- LEWCO
- Customer
If LEWCO, in what capacity?
- Total
- Supervision
Is non-union labor acceptable?
- Yes
- No
Do you require a budgetary installation quote?
- Yes
- No
Please indicate any physical space limitations of the installation location:
Please provide any additional information or requirements:
Drum or Tote Heating Application Form
Does the equipment require any hazardous area classification (ex. Class 1, Division 1, Group D)?
Is the product flammable or combustible?
- Yes
- No
If yes, what is the Flash Point of the product?
- °F
- °C
f yes, what is the Auto Ignition Temperature of the product?
- °F
- °C
Temperature & Performance Requirements:
- 300°F (150°C) Traditional "Hot Box"
- 300°F (150°C) High-Performance Oven (NFPA 86, Class B design. Indoor use only)
- 450°F (232°C) High-Performance Oven (NFPA 86, Class B design. Indoor use only)
Type of container to be heated?
- 55-Gallon Drums
- Totes/ IBC Tank
- Other
If other, please specify:
Number of drums or totes to be heated:
Standard Drum Cabinet Capacities: 1, 2, 4, 6, 8, 12, 16, 24, or 32 Drums Standard Tote Cabinet Capacities: 1, 2, 3, 4, 6, or 8 Totes
Where will the cabinet be installed?
- Indoor
- Outdoor
What type of configuration do you require?
- Low Profile (plate steel floor, no spill containment, indoor use only). Available in 1 to 12 drum capacities, not available for totes.
- Standard Profile (single-level with spill containment). Available in 1 to 16 drum, or 1 to 4 tote capacities.
- Multi-Level (two-level with spill containment). Available in 8 to 32 drum, or 2 to 8 tote capacities.
What is the preferred heating medium?
- Electric
- Saturated Steam
- Hot Water
- Hot Oil
*NOTE: Traditional "hot box" models with electric heating mediums are not suitable for heating flammable or combustible materials, nor can they be installed in a hazardously classified area.
If Electric, what is the supply Voltage/ Phase/ Hz (standard is 480/3/60)?
Supply Voltage/ Phase/ Hz (Standard is 480/3/60)
If Steam, what is the Supply Pressure (10-200 psi)?
Supply pressure (10-200 psi)
If Hot Water or Hot Oil, what is the Supply Temperature?
Supply Temperature (Please Specify Celsius or Fahrenheit)
If you selected saturated steam, hot oil, or hot water above; what type of temperature controls are required?
- None (no controls)
- Electronic process and redundant high-limit controllers
- 125°F - 212°F (52°C - 100°C), 1/2'' valve
- 158°F - 300°F (70°C - 149°C), 1/2'' valve
Non-electronic, self-acting temperature controller, limited to 150 psig, available in the following ranges: 125°F - 212°F (52°C - 100°C), 1/2'' valve 158°F - 300°F (70°C - 149°C), 1/2'' valve
Is a circulation fan required?
- Yes
- No
Do you require a vent (not available for outdoor installation)?
- Yes
- No
Do you require any additional options?
- Single Pen Chart Recorder
- Batch Timer (automatically turns off heat at completion)
- Door Switch (disables heat when opened)
- Steam Trap(s)
- Zero Speed Switch for Fans
- Data Logger
- Ramp / Soak Controller
- Adjustable Leveling Legs
- Auxiliary Hose Access Port
- Drum Rotator
- Premium Finish for Corrosive Areas
- Exhaust Fan (available for High-Performance models only)
- CSA Inspection
- Other Requirements
If other, please specify
Will the equipment be installed in the USA or be exported?
- USA
- Exported
If exported, do you require export crating?
- Yes
- No
Do you require a freight quote?
- Yes
- No
If a freight quote is requested, please provide a ship to address:
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Same address as above
- Same address as above
Please provide any additional information or requirements:
Phone
This field is for validation purposes and should be left unchanged.

LEWCO Product Configurator

Latest News

Media

Contact Us

LEWCO Product Configurator

General Information

Batch Oven Application Form

Conveyor Oven Application Form

Drum or Tote Heating Application Form

Latest News

Media

Contact Us